DTF Heat Press Instructions
DTF (DIRECT TO FILM) is the process in which designs are printed directly onto a film. The DTF transfer can be applied to almost any type of material/garment and can go on any color item.
Please note that every heat press is different. Temperatures and pressure are not always accurate. It is highly recommended to check your pressure and use a heat gun to check your temperature for the most accurate results. Triple A Designs is NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.
Direct To Film Transfers
- Pressing Temperature- 285
- Heavy Pressure (8-9 manual) 60PSI Automatic
- Pressing Time- 15 Sec
o Prepress Shirt
o Place Teflon Sheet Over Transfer
o Cold Peel
o Cover DTF Transfer with Teflon Sheet
o Repress 5-15 Secs for Best Results
Triple A Designs is not responsible for damaged transfers after you have pressed them. Please make sure you are knowledgeable on your heat, pressing pressure and peeling technique. This includes using non-commercial grade heat presses or irons to try and use our transfers.